HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 146
enclosureShow, The connector address used by the enclosure manager for this switch
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
2 enclosureShow enclosureShow Displays attributes of the switch enclosure. Synopsis enclosureshow attribute Description Use this command to display attributes of the switch enclosure. Supported attributes include the vendor-specific enclosure identifier and the identifier of the enclosure interface to which the switch is attached. This command is only meaningful for products that are embedded in a blade server or storage chassis. Most of the options are applicable to a specific platform. Options that do not apply to a platform are identified with a "Not supported on this platform" message. Operands This command has the following operand: attribute Specifies the enclosure attribute. Valid attributes include the following: id The vendor-specific enclosure identifier. modelname The vendor-specific enclosure model name. slotid The identifier of the enclosure interface to which the switch is attached. rackname The name assigned by the enclosure manager to this rack. rackid The serial number assigned by the enclosure manager to this rack. enclosurename The name assigned by the enclosure manager to this enclosure. enclosureid The serial number assigned by the enclosure manager to this enclosure. connname The product name used by the enclosure manager for this switch model. connaddr The connector address used by the enclosure manager for this switch (indicates the physical position of the switch in the enclosure). connid The serial number of the switch used by the enclosure manager (not to be confused with the Factory Serial Number). conntype The connector type used by the enclosure manager for this model of switch. connloc The switch location within the enclosure. connpres Information about the switch's presence that is used by the enclosure manager. connfuse Information about whether or not the switch has a fuse. Examples See Also To display the identifier of the enclosure interface to which the switch is attached: switch:admin> enclosureShow slotid Bay 4 chassisShow 120 Fabric OS Command Reference 53-1000599-02