HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 508

2 portErrShow portErrShow Displays port error summary. Synopsis porterrshow Description Use this command to display an error summary for all ports. The display contains one output line per port and shows error counters in ones, thousands (k), or millions (m). frames tx Frames transmitted frames rx Frames received enc in Encoding errors inside frames crc err Frames with CRC errors too shrt Frames shorter than minimum too long Frames longer than maximum bad eof Frames with bad end-of-frame delimiters enc out Encoding error outside of frames disc c3 Class 3 frames discarded link fail Link failures (LF1 or LF2 states) loss sync Loss of synchronization loss sig Loss of signal frjt Frames rejected with F_RJT fbsy Frames busied with F_BSY Operands none Examples To display error counters for ports on a switch: switch:admin> porterrshow frames enc crc too too bad enc disc link loss loss frjt fbsy tx rx in err shrt long eof out c3 fail sync sig 0: 0 0 0 0 0 0 0 0 0 0 0 2 0 0 1: 0 0 0 0 0 0 0 0 0 0 0 1 0 0 2: 0 0 0 0 0 0 0 0 0 0 0 1 0 0 3: 12 14 0 0 0 0 0 0 0 0 3 6 0 0 4: 300 300 0 0 0 0 0 2 0 1 1 2 0 0 5: 0 0 0 0 0 0 0 0 0 0 0 2 0 0 6: 12 14 0 0 0 0 0 0 0 0 3 6 0 0 7: 0 0 0 0 0 0 0 0 0 0 0 2 0 0 29: 0 0 - 0 0 0 0 - 0 - - - - 30: 0 0 - 0 0 0 0 - 0 - - - - 31: 0 0 - 0 0 0 0 - 0 - - - - (output truncated) See Also portShow, portStatsShow 482 Fabric OS Command Reference 53-1000599-02