HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 738

2 zoneObjectCopy zoneObjectCopy Copies a zone object. Synopsis zoneObjectCopy "objectName", "newName" Description Use this command to make a copy of an existing zone object and give it a new name. The resulting object is of the same type as the original object. You can use this command for all zone object types, including cfg, zone, and alias. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "objectName" The name of the object that you want to copy. Quotation marks are optional. "newName" The name of the object that you want created. Quotation marks are optional. A zone configuration name must begin with a letter followed by any number of letters, numbers, and underscores. Names are case-sensitive. For example, "Cfg_1" and "cfg_1" are different zone configurations. Blank spaces are ignored. Refer to the zoneCreate command for more information on name and member specifications Examples To create a configuration containing three zones: switch:admin> cfgshow "*" cfg: USA_cfg Red_zone; White_zone; Blue_zone switch:admin> zoneobjectcopy "USA_cfg", "UK_cfg" switch:admin> cfgshow "*" cfg: UK_cfg Red_zone; White_zone; Blue_zone cfg: USA_cfg Red_zone; White_zone; Blue_zone See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow, zoneObjectRename 712 Fabric OS Command Reference 53-1000599-02