HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 607
secPolicyRemove, Synopsis, Description, Notes, Operands, WWN Member Policy Types, DCC_POLICY Members
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 607 highlights
secPolicyRemove 2 secPolicyRemove Removes members from an existing security policy. Synopsis secpolicyremove "name" , "member[;member...]" Description Use this command to remove one or more members from an existing security policy. It is not possible to remove all members from the FCS_POLICY; the local switch WWN cannot be deleted from the FCS policy. In the case of SCC policy, if it is empty after removing all members, all access to the switch itself would be disallowed. Notes If FCS policy is enabled, this command must be issued from the primary FCS switch. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: "name" Specify the name of an existing policy you want to remove members from. Valid values for this operand are: • DCC_POLICY_nnn • FCS_POLICY • SCC_POLICY The specified policy name must be capitalized. The DCC_POLICY policy name has the common prefix DCC_POLICY_ followed by a string of user-defined characters. These characters do not have to be capitalized like regular policy names, but are case-sensitive. This operand is required. "member" Specify a member or list of members to delete from the policy. The list must be enclosed in quotation marks; members must be separated by semicolons. This operand is required. Depending on the policy type, members can be specified using IP address, WWN, domain, or switch name. WWN Member Policy Types The following policy types require members be specified by WWN address: • FCS_POLICY • SCC_POLICY These policy types require member IDs be specified as WWN strings, domains, or switch names. If domain or switch names are used, the switches associated must be present in the fabric or the command fails. DCC_POLICY Members The DCC_Policy_nnn is a list of devices associated with a specific switch and port combination. The device is specified with a WWN string. The switch and port combination must be specified in the switch port format where switch can be specified by switch WWN, domain, or switch name. The port Fabric OS Command Reference 581 53-1000599-02