HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 92

2 cfgShow cfgShow Displays zone configuration information. Synopsis cfgshow ["pattern"] [, mode] Description Use this command to display zone configuration information. If no operand is specified, all zone configuration information (both defined and effective) displays. If the local switch has an outstanding transaction, this command displays the most recently edited zone configuration that has not yet been saved. If the local switch has no outstanding transaction, this command displays the committed zone configuration. If a pattern is specified, only matching confirgurations are displayed. The defined configuration is the complete set of all zone objects that have been defined in the fabric. There can be multiple zone configurations defined, but only one can be enabled at a time. There might be inconsistencies in the definitions, zones, or aliases that are referenced but not defined, or there might be duplicate members. The defined configuration is the current state of the administrator input. The effective configuration is the single zone configuration that is currently enabled. The devices that an initiator sees in the fabric are based on this configuration. The effective configuration is built when a specific zone configuration is enabled and all error checking has been completed successfully. Notes When this command is executed after a zoning transaction was aborted on the local switch, it displays a warning message: Warning: Current Zoning Transaction was aborted. Reason code = Zone Config update received. When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. Operands The following operands are optional: "pattern" A POSIX-style regular expression used to match zone configuration names. The pattern must be enclosed in quotation marks and may contain the following: • Question mark (?) - matches any single character • Asterisk (*) - matches any string of characters. • Range - matches any character within the range. Ranges must be enclosed in brackets: for example, [0-9] or [a-f]. mode Specify 0 to display the contents of the transaction buffer (the contents of the current transaction) or specify 1 to display the contents of nonvolatile memory. The default value is 0. Examples To display all zone configurations that start with "Test": switch:admin> cfgshow "Test*" cfg: Test1 Blue_zone cfg: Test_cfg Red_zone; Blue_zone 66 Fabric OS Command Reference 53-1000599-02