HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 733

zoneAdd 2 zoneAdd Adds a member to the zone. Synopsis zoneadd "zoneName", "member;member" Description Use this command to add one or more members to an existing zone. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zoneName" Specify the name of an existing zone. Quotation marks are optional. "member" Specify a member or list of members to be added. The list must be enclosed in quotation marks. Members must be separated by semicolons. Valid values can be one or more of the following: A switch domain and port area or index number pair; for example, "2, 20". View the area or index numbers for ports using the switchShow command. • Node or port WWN. • Zone alias name. Examples To add aliases for three disk arrays to "Blue_zone": sw5:admin> zoneadd "Blue_Zone", "array3; array4; array5" See Also zoneCreate, zoneDelete, zoneRemove, zoneShow Fabric OS Command Reference 707 53-1000599-02