HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 247

fosConfig 2 --disable feature fcr . iSCSI iSNSC --show Disables a feature on the switch. This command can be run while the switch is online. Valid values for feature are: Disables the FC Routing service on the switch. All enabled EX_Ports and VEX_Ports on the switch must be offline for this command to succeed. If there is an XPath OS switch in the BB fabric, it may take up to eight minutes to complete the disable process. To use this command to disable the FC Routing service only instead of disabling the switch, issue this command, then change the BB fabric ID using fcrConfigure. When disabling the FCR service, you may encounter the following system messages: "Please disable all EX/VEX_Ports first before running this command." This means that there were EX_Ports or VEX_Ports online when this command was issued. Take these ports offline and try the command again. "FC Routing service is already disabled" -This means that the FC Routing service is already disabled. Disables the iSCSI service on the switch. Disables the iSNSC service on the switch. Displays the current operating status of features on the switch. Examples To display the status of the features: switch:admin> fosconfig --show FC Routing service: iSCSI service: iSNS Client service: enabled enabled disabled To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled To enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled To enable the iSCSI service: switch:admin> fosconfig --enable iscsi iSCSI service is enabled To disable the iSCSI service: switch:admin> fosconfig --disable iscsi iSCSI service is disabled See Also fcrConfigure, iscsiCfg, iscsiPortCfg, isnscCfg, switchShow Fabric OS Command Reference 221 53-1000599-02