HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 618
setModem, Synopsis, Description
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 618 highlights
2 setModem setModem Enables or disables modem dial-in to a control processor (CP). Synopsis setmodem [-e] | [-d] Description Use this command to enable or disable modem dial-in to a CP on those systems that support modem dial-in. When modem dial-in is enabled, you can log in to a CP through a modem, and a modem attached to the CP accepts the call. When modem dial-in is disabled, the modem attached to the CP does not accept the call. When entered with no operands, the command displays the current state of the modem dial-in. RJ-11 "Y" Adapter 592 Optional Handset Modem (two shown) Analog Telco Line DB-25M to DB-9F Modem Cable (one per CP Card) Note: Modem power connections not shown ! 1 2 3 4 5 6 7 8 9 10 ! Modem Port on CP Card (one per CP Card; RS-232 port interface) POWER SUPPLY 4 ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! ! RS - 232 RS - 232 IOIOI IOIOI Link 10/100 Mb/s Active CP Link 10/100 Mb/s Active CP ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! 15 d 14 c 13 b 12 a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! ! POWER SUPPLY 3 ! ! POWER SUPPLY 2 ! ! scale: 1/8" = 1" POWER SUPPLY 1 & 3 POWER SUPPLY 2 & 4 200-240 VAC 12A 50-60 Hz 200-240 VAC 12A 50-60 Hz POWER SUPPLY 1 2.015 Modem dial-in must be through a Hayes-compatible modem attached to a CP modem serial port. When the CP is active and dial-in is enabled, the modem is configured to answer an incoming call on the first ring. When the CP is standby and dial-in is enabled, the modem is configured to answer an incoming call on the seventh ring. Fabric OS Command Reference 53-1000599-02