HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 82

2 cfgAdd cfgAdd Adds a member to a zone configuration. Synopsis cfgadd "cfgName", "member[ ;member...]" Description Use this command to add one or more members to an existing zone configuration. This command changes the Defined Configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to take effect, enable the configuration with the cfgEnable command. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "cfgName" Specify a name for the zone configuration, in quotation marks. "member" Specify a zone member or list of zone members to be added to the configuration. The list must be enclosed in quotation marks. Members must be separated by a semicolons. Examples To add two new zones to the configuration "Test_cfg": switch:admin> cfgadd "Test_cfg", "greenzone; bluezone" See Also cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow 56 Fabric OS Command Reference 53-1000599-02