HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 496

2 portCfgSpeed portCfgSpeed Configures the speed level for a specified port. Synopsis portcfgspeed [slotnumber/]portnumber, speed Description Use this command to set the speed on a specified speed. This command disables and then re-enables the port, so that it comes up with the new speed setting. The configuration is saved in nonvolatile memory and is persistent across switch reboots or power cycles. Notes This configuration cannot be set on VE/VEX_Ports. Use portShow to display actual port speed levels. Use portCfgShow to display user-specified speed settings. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). portnumber Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. speed_level Specify the speed of a port. This operand is required. Valid values are one of the following: 0 Auto-sensing mode. The port automatically configures for maximum speed. 1 1-Gbps mode. The port is at a fixed speed of 1 Gbps. 2 2-Gbps mode. The port is at a fixed speed of 2 Gbps. 4 4-Gbps mode. The port is at a fixed speed of 4 Gbps. 8 8-Gbps mode. The port is at a fixed speed of 8Gbps. Examples To set the speed of a port to 2 Gbps: switch:admin> portcfgspeed 2/3, 2 See Also portCfgShow, portShow, switchCfgSpeed 470 Fabric OS Command Reference 53-1000599-02