HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 655
supportShow, slotnumber, portnumber1, lines, Understanding Admin Domain Restrictions
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 655 highlights
supportShow 2 supportShow Displays switch information for debugging purposes. Synopsis supportshow [[slotnumber/]portnumber1-portnumber2] [lines] Description Use this command to display support information from groups of preselected Fabric OS and Linux commands and other support and debugging information. You can specify the range of ports for which this information displays. These commands are organized by groups, but note that the order of the groups listed next is not the same as executed by the command. This is a diagnostic command and should only be run for diagnostic support. SupportShow executes commands in the following command groups. Use supportShowCfgenable or supportShowCfgenable to modify the settings for each group. os OS group commands, enabled by default. exception Exception group commands, enabled by default. port Port group commands, enabled by default. fabric Fabric group commands, enabled by default. services Service group commands, enabled by default. security Security group commands, enabled by default. network Network group commands, enabled by default. portlog Portlog group commands, enabled by default. system System group commands, enabled by default. extend Extend group commands, disabled by default. filter Filter group commands, disabled by default. perfmon Performance Monitor group commands, disabled by default. ficon FICON group commands, disabled by default. iswitch FC Router group commands, disabled by default. asic_db ASIC DB group commands, disabled by default. iscsi ISCSI group commands, disabled by default. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. This command should only be run when requested by Brocade support personnel. Output generated by this command may vary by switch configuration and platform. Output may change without notice. Fabric OS Command Reference 629 53-1000599-02