HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 540

2 portShow portShow Displays the status of the specified port. Synopsis portshow [slot/]port portshow [options] [slot/]geport arguments optional_arguments Description Use this command to display general port status and specific configuration parameters for the specified port If this command is executed for a specified port with no additional options, it displays general status and configuration for that port. If executed with optional arguments for a gigabit Ethernet (GbE) port, the command displays specific FCIP related port configuration parameters, such as the following: • Address resolution protocol (ARP) entries • IP interfaces on the GbE port • Static routes on the IP interfaces • Fibre Channel over IP (FCIP) tunnel configuration settings • Port Mode information • FICON parameters • VLAN tag configuration • FTRACE settings The following general information is displayed when the command is issued for a non-GbE port without additional arguments: portName Name assigned to the port by the portName command. portHealth Current health of the port (requires a Fabric Watch license). Authentication Authentication type and associated parameters (ifapplicable) used on the port at port online. None No authentication was performed. FCAP FCAP authentication was performed. DHCHAP DHCHAP authentication was performed. Also displays DH group and hash type used for authentication. portDisableReason Provides an explanation for the port's disabled status, if it has not been disabled by portDisable or portCfgPersistentDisable. portCFlags Port control flags. portFlags A bit map of port status flags, including information on the type of port, whether it is fully online, and whether logins have been accepted. portType The port's type and revision numbers. portState The port's SNMP state: Online Up and running. Offline Not online, see portPhys for more detail. 514 Fabric OS Command Reference 53-1000599-02