HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 380

2 msTdEnable msTdEnable Enables the Management Server (MS) topology discovery service. Synopsis mstdenable ["ALL"] Description Use this command to enable the MS topology discovery service on the local switch or throughout the fabric. The change takes effect immediately and commits to the configuration database for all affected switches. The change is persistent across power cycles and reboots. Notes Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued only from the primary FCS. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands The following operand is optional: "ALL" Enables the MS topology discovery service throughout the fabric. This operand must be enclosed in double quotation marks. Examples To enable the MS topology discovery service on the local switch: switch:admin> mstdenable Request to enable MS Topology Discovery Service in progress.... done. *MS Topology Discovery enabled locally. To enable MS topology discovery on all switches in the fabric: switch:admin> mstdenable "ALL" Request to enable MS Topology Discovery Service in progress.... done. *MS Topology Discovery enabled locally. *MS Topology Discovery Enable Operation Complete!! See Also msTdDisable, msTdReadConfig 354 Fabric OS Command Reference 53-1000599-02