HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 308

2 iodDelayReset iodDelayReset Resets the user-defined IOD delay settings to default values. Synopsis ioddelayreset domain_id Description Use this command to reset the user-defined IOD delay settings to default values (-1). This command resets IOD delay values for a specified domainID that was previously configured with the iodDelaySet command. When IOD delay is not configured or reset, the system uses its own internal algorithm to calculate the IOD delay. The switch must be disabled before IOD delay can be set. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To reset IOD delay to default values for domain 10: switch:admin> ioddelayreset 10 See Also iodSet, iodReset, iodShow, iodDelaySet, iodDelayShow 282 Fabric OS Command Reference 53-1000599-02