HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 357

linkCost 2 cost Specify the static cost of the link connected to the specified port. Valid values are 0 to 65,535. Assigning a value outside this range will fail and generate an error. A value of 0 removes the static cost and the port reverts to its default link cost. If cost is not specified, the command displays the current cost of the specified port. Examples To display the link costs for all ports on a switch: switch:admin> linkcost Slot Interface Cost 2 0 500 (STATIC) 2 1 1000 2 2 500 (STATIC) 2 3 200 (STATIC) 2 4 1000 2 5 1000 2 6 1000 2 7 1000 2 8 1000 2 9 1000 2 10 1000 2 11 (E_PORT) 2000 (STATIC) 2 12 1000 2 13 1000 2 14 1000 2 15 1000 Type to continue, Q to stop: To set the ISL cost on a port: switch:admin> linkcost 2/4 500 To display the new cost value on the same port: switch:admin> linkcost 2/4 Interface2/4 Cost 500 (STATIC) To delete the cost value and reset to default: switch:admin> linkcost 2/4 0 To display the change: switch:admin> linkcost 2/4 Interface2/4 Cost 1000 See Also interfaceShow, lsDbShow, topologyShow, uRouteShow, fcrRouterPortCost Fabric OS Command Reference 331 53-1000599-02