HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 112

Message, Probable Cause

Page 112 highlights

Diagnostic and system error messages reference guide FABRIC-RECONFIG Message INFO FABRIC-RECONFIG, 4, fabric: Probable Cause The fabric has reconfigured due to an offline port. The reason can be one of the following: Fabric Merge Own ID Rcvd Merging two fabrics A subordinate switch received an EFP or EFP ACC that has a payload error, listing this switch as being the principal switch. Fabric Segment Offline Unconfirmed domain Rcv BF HA: At F2 State HA: No Upstream Principal port became segmented. Principal port went offline. Switch was not able to get a domain ID. RDI ACC was never received. Received Build Fabric (BF) command. According to the Fibre Channel specification, F2 is defined as the principal switch selection. If a failover occurs at this time, the switch is forced to restart principal switch selection. After failover, the newly active fabric reboots as a subordinate, but there is no upstream fabric. HA: bad EFP resp Received an invalid EFP response. HA: RJT EFP resp HA: DLST EFP resp HA: PPRI EFP resp Received an EFP reject response in which this EFP was used for verifying the neighbor's domain list as part of fabric warm-start recovery. A reject occurs if the neighbor is reconfiguring or the neighbor's port is in a bad state. Received an EFP accept response with a different domain list. Received an EFP accept response in which the response has a different principal switch priority number. HA: PWWN EFP resp Received an EFP accept response in which the response has a different principal switch World Wide Name. HA: MAX EFP resp HA: Can't Snd EFP HA: Offline Principal Selection Mode An EFP to a neighbor failed to respond, and the fabric reached its maximum retry count for this neighboring switch. Was not able to send an EFP. A principal port went offline during the fabric daemon's warm-start recovery. The user has run the fabricprincipal command, forcing a fabric rebuild. 112 Fabric OS 3.x Document Addendum

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Diagnostic and system error messages reference guide
112
Fabric OS 3.x Document Addendum
FABRIC-RECONFIG
Message
Probable Cause
The fabric has reconfigured due to an offline port. The
reason
can be one of the following:
<timestamp>
INFO FABRIC-RECONFIG, 4, fabric: <reason>
Fabric Merge
Merging two fabrics
Own ID Rcvd
A subordinate switch received an EFP or EFP ACC that has
a payload error, listing this switch as being the principal
switch.
Fabric Segment
Principal port became segmented.
Offline
Principal port went offline.
Unconfirmed domain
Switch was not able to get a domain ID. RDI ACC was
never received.
Rcv BF
Received Build Fabric (BF) command.
HA: At F2 State
According to the Fibre Channel specification, F2 is defined
as the principal switch selection. If a failover occurs at this
time, the switch is forced to restart principal switch
selection.
HA: No Upstream
After failover, the newly active fabric reboots as a
subordinate, but there is no upstream fabric.
HA: bad EFP resp
Received an invalid EFP response.
HA: RJT EFP resp
Received an EFP reject response in which this EFP was
used for verifying the neighbor's domain list as part of
fabric warm-start recovery. A reject occurs if the neighbor
is reconfiguring or the neighbor's port is in a bad state.
HA: DLST EFP resp
Received an EFP accept response with a different domain
list.
HA: PPRI EFP resp
Received an EFP accept response in which the response has
a different principal switch priority number.
HA: PWWN EFP resp
Received an EFP accept response in which the response has
a different principal switch World Wide Name.
HA: MAX EFP resp
An EFP to a neighbor failed to respond, and the fabric
reached its maximum retry count for this neighboring
switch.
HA: Can't Snd EFP
Was not able to send an EFP.
HA: Offline
A principal port went offline during the fabric daemon's
warm-start recovery.
Principal Selection
Mode
The user has run the
fabricprincipal
command,
forcing a fabric rebuild.