HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 124
Sec-secviol_dcc, Sec-secviol_login
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Diagnostic and system error messages reference guide SEC-SECVIOL_DCC Message INFO SEC-SECVIOL_DCC, 4, Security violation: Unauthorized device tries to flogin to port of switch . Probable Cause A DCC security violation was reported. The specified device attempted to perform a FLOGI operation to an unauthorized port. The DCC policy correlates specific devices to specific port locations. If the device changes connected port, the device is not allowed to perform FLOGI. Recommended Action Check the DCC policy and verify that the specified device is allowed in the fabric and is included in the DCC policy. If the specified device is not included in the policy, add it to the policy. If the device is not allowed, this is a valid violation message and an unauthorized entity is trying to gain access to your fabric; take appropriate action as defined by your enterprise security policy. Severity INFO SEC-SECVIOL_LOGIN Message INFO SEC-SECVIOL_LOGIN, 4, Security violation: Login failure attempt via . Peer IP: Probable Cause A login security violation was reported. An incorrect password was used while trying to log in through a console, telnet, HTTP, or API connection; the login failed. Recommended Action Use the correct password. Severity INFO 124 Fabric OS 3.x Document Addendum