HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 143
Enabling and Disabling Local Authentication, the name or IP address of the server to be changed.
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Fabric OS procedures user guide To delete a RADIUS server from the configuration: 1. Issue the following command: aaaConfig "--remove server | all" where: server all Is a server listed either by name or IP address. Enter either the name or IP address of the server to be removed. Is a keyword that removes all servers. If RADIUS service is enabled, this removes all but the server in the first position. If RADIUS service is disabled, all servers are removed. 2. At the prompt, enter y to complete the command. When the command succeeds, an event is sent to the event log, indicating that the server is removed. To change the parameters of a RADIUS server that is already configured, issue the following command: aaaConfig "--change server [-p port] [-s secret] [-t timeout] [-a pap | chap]" where: server Is a server listed either by name or IP address. Enter either the name or IP address of the server to be changed. -p port Is an option; enter a server port. -s secret Is an option; enter a shared secret. -t timeout Is an option; enter the length of time (in seconds) the server has to respond before the next server is contacted. -a pap | chap Is an option; specify that the PAP protocol be used instead of the CHAP protocol for packets traveling between the switch and the server. To change the order in which RADIUS servers are contacted for service, issue the following command: aaaConfig "--move server to_position" where: server Is a server listed either by name or IP address. Enter either the name or IP address of the server whose position order is to be changed. to_position Is the number of the position to which the server is to be moved. When the command succeeds, it triggers an event log, indicating that a server configuration is changed. Enabling and Disabling Local Authentication: Fabric OS 3.x Document Addendum 143