HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 155

aaaconfig, Syntax, Availability, Description, Operands

Page 155 highlights

Fabric OS reference guide aaaconfig Syntax Availability Description Operands Configures the RADIUS server settings. aaaconfig ["--actions"] Admin Use this command to accomplish the following: ■ Display the current RADIUS configuration. ■ Add and delete new RADIUS servers. ■ Modify an existing RADIUS server configuration. ■ Enable and disable the RADIUS configuration. The configuration applies to a single switch instance only. This command has the following operands: --show --add server_IP Lists current RADIUS configurations. This information includes the RADIUS servers, port numbers, protocol, and so forth. The operand appears whether or not the RADIUS and switch database configuration are enabled. Adds a new RADIUS server. The minimum required field is the IP address of the server. All other fields use defaults: port to 1812, timeout to 3 seconds, and protocol to CHAP. The server is added to the end of the list. No more than five RADIUS servers can be configured. --remove server_IP Deletes the specified RADIUS server, if it exists. --change server_IP [-p port] [-s secret] [-t timeout] [-chap | -pap] Changes the specified server attributes. The operand server_IP is mandatory. If any attributes are specified, they are updated. --move server_IP to_position --radius [on | off] Moves the specified server to a specific position in the list of servers. The --show operand displays the current position of the servers. Enables or disables the RADIUS configuration. If enabled, all login attempts are first attempted through the RADIUS servers configured. If disabled, the servers are not accessed and users are authenticated from the switch database. Fabric OS 3.x Document Addendum 155

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Fabric OS reference guide
155
Fabric OS 3.x Document Addendum
Configures the RADIUS server settings.
Syntax
aaaconfig [“--
actions”
]
Availability
Admin
Description
Use this command to accomplish the following:
Display the current RADIUS configuration.
Add and delete new RADIUS servers.
Modify an existing RADIUS server configuration.
Enable and disable the RADIUS configuration.
The configuration applies to a single switch instance only.
Operands
This command has the following operands:
aaaconfig
--show
Lists current RADIUS configurations. This information
includes the RADIUS servers, port numbers, protocol, and
so forth. The operand appears whether or not the RADIUS
and switch database configuration are enabled.
--add server_IP
Adds a new RADIUS server. The minimum required field is
the IP address of the server. All other fields use defaults:
port to 1812, timeout to 3 seconds, and protocol to CHAP.
The server is added to the end of the list. No more than five
RADIUS servers can be configured.
--remove server_IP
Deletes the specified RADIUS server, if it exists.
--change server_IP
[-p port]
[-s secret]
[-t timeout]
[-chap | -pap]
Changes the specified server attributes. The operand
server_IP
is mandatory. If any attributes are specified,
they are updated.
--move
server_IP
to_position
Moves the specified server to a specific position in the list
of servers. The
--show
operand displays the current
position of the servers.
--radius
[on | off]
Enables or disables the RADIUS configuration. If enabled,
all login attempts are first attempted through the RADIUS
servers configured. If disabled, the servers are not accessed
and users are authenticated from the switch database.