HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 161
See Also, configdownload, Syntax, Availability, Description
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
To set DH group 3: switch:admin> authutil "--set -g 3" Committing configuration...done. DH Group is set to 3. Fabric OS reference guide See Also To set all DH groups to be specified in authentication negotiate order of 0, 1, 2, 3, and 4: switch:admin> authutil "--set -g *" Committing configuration...done. DH Group is set to 0,1,2,3,4 portshow secauthsecret configdownload Downloads the switch configuration from a host file. Syntax configdownload ["host", "user", "file" [, "passwd"]] Availability Admin Description Use this command to download the switch configuration from a host file. The configuration file might have been generated previously using configupload, or it might have been created to download only specific configuration changes. See configupload for a description of the configuration file format. The download process uses either file transfer protocol (FTP) or the RSHD protocol (TCP service 514). Both of these services are widely available on UNIX® hosts, but less so on Windows hosts. On Windows NT®, the FTP server might have to be installed from the distribution media and enabled; on Windows NT or Windows 9x, there are several good freeware and shareware FTP servers available. To use RSHD on Windows NT or 9x, two utilities are supplied, RSHD.EXE and CAT.EXE, together with instructions on how to install and run them. The FTP server or RSHD must be running before a download can occur. The command can be invoked without any parameters; in that case the user is prompted for input, including choice of FTP or RSHD. If invoked with three parameters, RSHD is used; otherwise, the presence of the fourth parameter (FTP password) selects FTP. Fabric OS 3.x Document Addendum 161