HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 196

perfshoweemonitor, Syntax, Availability, Description, Operands, Examples

Page 196 highlights

Fabric OS reference guide perfshoweemonitor Displays user-defined end-to-end monitors on a port. Syntax perfshoweemonitor port [, interval] Note: This command is deprecated. The perfmonitorshow command should be used instead. Availability Description Operands All users Use this command to display previously defined end-to-end monitors on a port. When an interval is not specified or 0 is specified, the command displays the 64-bit cumulative transmit counter (TX_COUNT), receive counter (RX_COUNT) in Fibre Channel words (4 bytes), and the 33-bit CRC error counters in hexadecimal format. When a nonzero interval is specified in seconds, the command displays a rolling table of CRC, Tx and Rx counters on a per-interval basis for all the valid monitors on the port, in the units of bytes. End-to-end monitor monitors the traffic on receiving port. See perfaddeemonitor for more details on how to specify a monitor you want. This command has the following operands: port Specify the port number where you want to display the end-to-end monitors. This operand is required. interval Specify the interval in second to monitor CRC_COUNT (CRC), TX_COUNT (Tx) and RX_COUNT (Rx). Tx and Rx are in unit of byte. This operand is optional. Examples To display EE monitors on port 3: switch:admin> perfShowEEMonitor 3 There are 2 end-to-end monitor(s) defined on port 3. KEY SID DID OWNER_APP OWNER_IP_ADDR TX_COUNT RX_COUNT CRC_COUNT 0 0xb1300 0xb23ef TELNET N/A 0x0000000000000000 0x000000000025ad4f 0x0000000000000000 1 0xb1200 0xb22ef TELNET N/A 0x0000000000000000 0x000000000025ad4f 0x0000000000000000 196 Fabric OS 3.x Document Addendum

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Fabric OS reference guide
196
Fabric OS 3.x Document Addendum
Displays user-defined end-to-end monitors on a port.
Syntax
perfshoweemonitor
port
[,
interval
]
Note:
This command is deprecated. The
perfmonitorshow
command should be used instead.
Availability
All users
Description
Use this command to display previously defined end-to-end monitors on a port. When an
interval is not specified or 0 is specified, the command displays the 64-bit cumulative transmit
counter (TX_COUNT), receive counter (RX_COUNT) in Fibre Channel words (4 bytes), and
the 33-bit CRC error counters in hexadecimal format. When a nonzero interval is specified in
seconds, the command displays a rolling table of CRC, Tx and Rx counters on a per-interval
basis for all the valid monitors on the port, in the units of bytes.
End-to-end monitor monitors the traffic on receiving port. See
perfaddeemonitor
for
more details on how to specify a monitor you want.
Operands
This command has the following operands:
Examples
To display EE monitors on port 3:
perfshoweemonitor
port
Specify the port number where you want to display the end-to-end
monitors. This operand is required.
interval
Specify the interval in second to monitor CRC_COUNT (CRC),
TX_COUNT (Tx) and RX_COUNT (Rx). Tx and Rx are in unit of byte.
This operand is optional.
switch:admin>
perfShowEEMonitor 3
There are 2 end-to-end monitor(s) defined on port 3.
KEY
SID
DID
OWNER_APP
OWNER_IP_ADDR
TX_COUNT
RX_COUNT
CRC_COUNT
-------------------------------------------------------------------------------------------------------------------
0
0xb1300
0xb23ef
TELNET
N/A
0x0000000000000000
0x000000000025ad4f
0x0000000000000000
1
0xb1200
0xb22ef
TELNET
N/A
0x0000000000000000
0x000000000025ad4f
0x0000000000000000