HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS 3.X Document Addendum (AA-RW - Page 182

fwshow, Syntax, Availability, Description, Operands, Examples

Page 182 highlights

Fabric OS reference guide To set the port persistence time to 18 seconds: switch:admin> fwSet "--port", "--persistence", "18" fwshow Syntax Availability Description Operands Examples 182 Displays the thresholds monitored by Fabric Watch. fwshow ["--message"] | ["--port", "--persistence"] All users If no parameters are entered, a summary of all thresholds is displayed. If a valid threshold name is entered as a parameter, detailed information pertaining only to that threshold is displayed. Note: This command requires a Fabric Watch license. The following operands are supported: --port --persistence Currently, --port has only one action, which is --persistence. This is the time that a port must be persistently in a state before being marked as such. --message Displays the severity levels of the messages being sent to the console. To display the thresholds monitored by Fabric Watch: switch:admin> fwShow Name Label Last value envTemp001 Env Temperature 1 33 C envTemp002 Env Temperature 2 33 C envTemp003 Env Temperature 3 36 C envTemp004 Env Temperature 4 35 C envTemp005 Env Temperature 5 36 C envFan001 Env Fan 1 5070 RPM envFan002 Env Fan 2 3090 RPM envFan003 Env Fan 3 3150 RPM envFan004 Env Fan 4 5130 RPM envPS002 Env Power Supply 2 0 (1 OK/0 FAULT Fabric OS 3.x Document Addendum

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250

Fabric OS reference guide
182
Fabric OS 3.x Document Addendum
To set the port persistence time to 18 seconds:
Displays the thresholds monitored by Fabric Watch.
Syntax
fwshow ["--message"] | ["--port", "--persistence"]
Availability
All users
Description
If no parameters are entered, a summary of all thresholds is displayed. If a valid threshold
name is entered as a parameter, detailed information pertaining only to that threshold is
displayed.
Note:
This command requires a Fabric Watch license.
Operands
The following operands are supported:
Examples
To display the thresholds monitored by Fabric Watch:
switch:admin>
fwSet "--port", "--persistence", "18"
fwshow
--port --persistence
Currently,
--port
has only one action, which is
--persistence
. This is the time that a port must
be persistently in a state before being marked as such.
--message
Displays the severity levels of the messages being sent
to the console.
switch:admin>
fwShow
=========================================================================
Name
Label
Last value
----------------
------------------------
-----------------------------
envTemp001
Env Temperature 1
33 C
envTemp002
Env Temperature 2
33 C
envTemp003
Env Temperature 3
36 C
envTemp004
Env Temperature 4
35 C
envTemp005
Env Temperature 5
36 C
envFan001
Env Fan 1
5070 RPM
envFan002
Env Fan 2
3090 RPM
envFan003
Env Fan 3
3150 RPM
envFan004
Env Fan 4
5130 RPM
envPS002
Env Power Supply 2
0 (1 OK/0 FAULT