LG LS980 Owners Manual - English - Page 23

Carrier data - Data use threshold approaching or exceeded. TTY - Indicates that your phone is operating in TTY mode. Hotspot Active - Indicates that Portable Wi-Fi hotspot is active. Turn Your Phone On and Off Turn your phone on and off and wake-up the screen by using the Power/Lock Button . Turn Your Phone On ► Press and hold the Power/Lock Button . Once your phone is on, it may display "Searching for Service." When your phone finds a signal, it enters standby mode - the phone‟s idle state. At this point, you are ready to begin making and receiving calls. If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode. In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint service by pressing any key (when your phone is turned on). Tip: The Power Save feature conserves your battery power when you are in an area where there is no signal. Turn Your Phone Off 1. Press and hold the Power/Lock Button options on the display screen. for two seconds until you see the Phone 2. Tap Power off and then tap OK to power off the phone. Your screen remains blank while your phone is off (unless the battery is charging). Wake Up the Screen If you don‟t use the phone for a while, the screen and backlight will shut off to conserve battery power. 1. Press the Power/Lock Button . Your lock screen will appear. See Lock screen. 2. Swipe the screen to any direction to unlock it. The last screen you were working on opens. (This is the default lock screen.) Phone Basics 12