Lexmark C782 Service Manual - Page 112

5061 Ready-bin x full displays and paper feeds into bin x Step 1 Actions and questions Bin x sensor flag-Make sure the bin x sensor flag is not in the up position and is operating correctly. Is the sensor flag operating correctly? Yes Replace the bin x sensor. If this does not fix the problem, replace the control board. No Repair or replace as necessary. Paper does not feed into the bin selected. 272.xx Paper Jam-check bin 1 message Step 1 2 3 4 Actions and questions Bin parts-Check all the bin parts, deflector gate, deflector spring, deflector cover, deflector cover spring, and shaft assemblies for signs of missing or loose springs. Check for binds in the deflecto gater or deflector cover, broken or binding shaft assemblies, or broken gear teeth. Are parts broken, loose, binding, or missing? Bin x solenoid-Check the solenoid for any binds or sticking problems. Is the solenoid binding or sticking? Bin x solenoid-Check the resistance of the solenoid. It measures between approximately 30 ohms and 50 ohms. Is the resistance correct? Mechanical linkage/motor assembly-Check the gears, clutch, and other linkage parts for correct operation and any signs of wear, broken gear teeth, or damaged parts. Are the mechanical linkage assembly mechanical parts broken, worn, or damaged? Yes Replace parts or repairs necessary. Replace the solenoid assembly. Replace the 5-Bin Mailbox control board assembly. Replace the mechanical linkage/DC motor assembly. No Go to step 2 Go to step 3 Replace bin x solenoid assembly. Replace the 5-Bin Mailbox control board assembly. 2-70 Service Manual