Lexmark C782 Service Manual - Page 162

5061 Selected menus Quality Menu Use this menu selection to change settings that affect print quality and save toner. Quality menu details Menu selection Print Mode Color Correction Print Resolution Toner Darkness Color Saver RGB Brightness RGB Contrast RGB Saturation Purpose Values To determine whether images are printed in a monochrome grayscale or in color. Color (default) Black Only To adjust the printed color to better match the colors of other output devices or standard color systems. Due to the differences between additive and subtractive colors, certain colors that appear on the monitor are impossible to duplicate on the printer. Auto (default) Off Manual Applies different color conversion tables to each object on the printed page, depending on the type of object and how the color for each object is specified. No color correction is implemented. Allows customization of the color conversion tables applied to each object on the printed page, depending on the type of object and how the color for each object is specified. Customization is performed using the selections available under the Manual Color menu item. Selects the quality of printed output. 1200 dpi 4800 CQ (default) Lighten or darkens printed 1 to 5 output and conserves toner. 4 is the default setting. Select a lower number to lighten the printed output or save toner. To conserve toner in graphics and images yet maintain high quality text. The amount of toner used to print graphics and images is reduced; however, text is printed with default toner usage. If selected, this setting overrides Toner Darkness settings. Color Saver is not supported in PPDS, and partially supported by the PCL emulation driver. On Off (default) To assist in making brightness, contrast, and saturation adjustments to color output. These functions do not affect files where CMYK color specifications are being used. -6, -5, -4, -3, -2, -1, -6 is the maximum decrease 0, 1, 2, 3, 4, 5, 6 6 is the maximum increase 0 is the default setting 0, 1, 2, 3, 4, 5 0 is the default setting 5 is the maximum increase 0, 1, 2, 3, 4, 5 0 is the default setting 5 is the maximum increase 2-120 Service Manual