Lexmark C782 Service Manual - Page 168

5061 User attendance messages (continued) User primary message Explanation Insert Tray Install bin Install duplex Invalid Engine Code Invalid file format Invalid Network Code Invalid PIN ITU Life Warning Load manual feeder with Load manual feeder with Load manual feeder with Load manual feeder with This message is displayed when the printer requests the user to insert tray x before it can continue printing the job. The printer needs to pick media from the missing tray or the trays below it. Tray=Tray 1, Tray 2, Tray 3, Tray 4, or Tray 5 Note: This message displays when refilling the trays during a job. Before filling tray x, take the printer offline by pressing Stop, and wait for pages to read the output bin. The following actions can be taken: • Insert the requested tray, or • Press Menu to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu: - Cancel Job - Reset Printer - Reset Active Bin - Check Supply Levels This message is displayed when the user has Hot Unplugged a paper handling option and the printer requires the reinstallation of the option to print a page which has been formatted by an install Tray x interpreter prior to the removal of the option or Cancel Job. • Bin x (x=1, 2, or 3) • Tray x (x=2, 3, or 4) • Duplex The following options can be taken: • Insert the requested option, or • Press Menu to access the Busy/Waiting Menu. The following functions are available using the Busy/Waiting Menu. - Cancel Job - Reset Printer - Reset Active Bin - Check Supply Levels Download valid engine code to the printer. Note: You can download engine code while this message is displayed. The selected file on the USB device is not valid. Download valid code to the internal print server. Note: You can download network code while this message is displayed. Enter the correct PIN. • Image transfer unit is near end of life. • Press to clear the message and print without installing a new ITU assembly. • Replace the image transfer unit and, if necessary, reset the printer internal counter for the image transfer unit. • Load the specified paper in the manual feed tray or multipurpose feeder. • Press to ignore the manual feed request and print on paper already installed in one of the input sources. If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size, it prints on whatever paper is installed in the default input source. • Cancel the current job. 2-126 Service Manual