Lexmark C782 Service Manual - Page 165

5061 Utilities Menu (continued) Menu selection Remove Held Jobs Format Flash Purpose Values Removes confidential and held jobs from the printer hard disk. Confidential Held Not Restored All Formats the flash memory. Yes Warning: Do not turn off the printer while the flash is formatting. No Defragment Flash Retrieves lost storage area Yes from resources that were deleted from flash memory. Warning: Do not turn off the printer while the flash is defragmenting. No Format Disk Formats the printer hard Yes disk. Warning: Do not turn off the printer while the hard No disk is formatting. Job Acct Stat Color Alignment Prints a listing of all job statistics stored on the hard disk, or clears all statistics on the disk. Print Clear To print a color alignment test page, which can be used to properly align how colors are printed. Print Alignment Page Set A-Set L Hex Trace Helps isolate the source of Activate a print job problem. Coverage Estimator LCD Contrast Provides an estimate of the percent coverage of cyan, magenta, yellow, and black on a page. The estimate is printed on a separator page. Adjusts the contrast of the operator panel display. Off (default) On 1-10 LCD Brightness Adjusts the brightness of 1-10 the operator panel display. Selecting a menu value only affects jobs that are resident in the printer. Bookmarks, jobs on USB flash memory devices, and other types of held jobs are not affected. Deletes any data stored in flash memory and prepares the flash memory to receive new resources. Cancels the request to format the flash memory and leaves current resources stored in flash memory. Transfers all resources stored in flash memory to printer memory and then reformats the flash memory option. When the format operation is complete, the resources are loaded back into flash memory. Cancels the request to defragment the flash memory. Deletes any data stored on the hard disk and prepares the device to receive new resources. Cancels the request to format the hard disk and leaves current resources stored on the disk. Prints all statistics available for the most recent print jobs. Deletes all accumulated job statistics from the hard disk. No selections exist for this operation. Pressing the Select button will print the alignment page. You are prompted to enter alignment values for each setting (A-L). With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not executed. Note: To exit Hex Trace, turn the printer off, or reset the printer by pressing Stop ( ). Percent coverage is not printed. Prints the estimated percentage of coverage for each color on a page. 5 is the default setting. A higher value will make the display appear lighter, a lower value makes the display appear darker. 5 is the default setting. A higher value increases the brightness of the display, a lower value decreases the brightness of the display. Diagnostic information 2-123