Lexmark C782 Service Manual - Page 53
Unrecoverable TPS Sensor Error-Replace the ITU assembly. See, 9xx service errors, Error code, Action - 900 service rip software
View all Lexmark C782 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
5061 Error codes and paper jam messages (continued) Error code Action 250.xx Paper Jam Clear Paper Path 271.xx Paper Jam Clear Paper Path 272.xx Paper Jam Clear Paper Path 280.xx Paper Jam Clear Paper Path 282.98 Staple Jam Check Stapler Paper is jammed in the MPF. If removing the jammed media does not fix the problem, go to "250.xx paper jam service check" on page 2-47. Paper has jammed at the output bin. Open the door of the bin to access the jammed media. If removing the jammed media does not fix the problem, go to "271.xx paper jam service check" on page 2-49. Media is jammed in the 5-Bin Mailbox Option. Open the rear door of option to access the jammed media. If removing the jammed media does not fix the problem, go to "272.xx paper jam service check" on page 2-50. This includes 280.36-40 and 280.80. Media has jammed in the StapleSmart finisher option. Open the finisher option front door to access the jammed pages. Note: If the accumulated sheets are removed, the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, replace the StapleSmart finisher option. The stapler device detects a paper jam during normal stapler operation such as when printing and stapling jobs. Check stapler are for jam in accumulator or stapler. Remove stapler cartridge to check for staple jam. Press to initiate priming and resume printing. If this does not fix the problem, go to "282.98 paper jam service check" on page 2-51. 9xx service errors 900.xx RIP Software Error 902.xx Engine Software 903.xx Engine Software 904.xx Engine Software 905.xx Engine Software 906.xx Engine Software 907.xx Engine Software 908.xx Engine Hardware Failure 920.xx TPS Sensor Go to "900.xx RIP Software Error service check" on page 2-51. General Engine Software Errors 902 through 907 indicate an unrecoverable engine software error. The system board may cause this type of error. Turn the printer off and on to try and clear the error code. If this does not fix the problem after several attempts, contact your next level of support before replacing the system board. General Engine Hardware Error 908 indicates an unrecoverable engine electronic hardware error. The system board may cause this type of error. Turn the printer off and on to try and clear the error code. If this does not fix the problem after several attempts, contact your next level of support before replacing the system board. Unrecoverable TPS Sensor Error-Replace the ITU assembly. See "ITU assembly removal" on page 4-49. Diagnostic information 2-11