Lexmark C782 Service Manual - Page 188

5061 REGISTRATION Use REGISTRATION to align the black image on the page. Use ALIGNMENT to align the individual colors. The black image should be aligned before the individual colors are aligned. To set Registration: 1. Select REGISTRATION from the Diagnostics mode. 2. Press to print the Quick Test Page. Current margin settings are listed on the printout. 3. Determine how values should change to align the arrows to the top, bottom, right, and left margins. Align the Registration Line to the edge of the page. 4. Select Top Margin. REGISTRATION Top Margin Bottom Margin Left Margin 5. Press or to decrease or increase the value for Top Margin. The print registration range is: Top Margin: -25 to +25 Bottom Margin: -25 to +25 Left Margin: -15 to +15 Right Margin: -15 to +15 Increasing the value moves the image down the page. Always adjust the top before the bottom margin. Increasing the value stretches the image toward the bottom of the page. Increasing the value moves the image toward the left margin. Always adjust the left before the right margin. Increasing the value compresses the image toward the left on the page. Note: Adjusting the Top and Left margins moves the entire image. Adjusting the Bottom and Right margins causes the image to expand or compress. It is easier to adjust the Top and Left margins first, then adjust the Bottom and Right. 6. Press Select ( ) to save the value. Submitting Selection... appears. 7. To verify the margin values are correct, print the Quick Test Page from the registration screen. Press to print the test page. While printing, Quick Test Printing... is displayed. Once printing is complete, the Registration screen appears. See a sample of the "Quick Test Page" on appendix page B-6. 3-10 Service Manual