Lexmark C782 Service Manual - Page 72

5061 200.06 paper jam service check The narrow media sensor made at an unexpected time. Note: See "Printer sensors" on page 5-3. Step 1 2 Actions and questions Check tray for the edge guide setting and media loading. Edge guides should be adjusted against edge of media. Media should be fanned and lay flat in the tray. Is the media properly loaded in the tray? Media may not have been cleared from a previous jam. Is media in paper path? Yes Go to step 2 Clear the paper path. 200.07 paper jam service check S2 or narrow media sensor did not break in time. Note: See "Printer sensors" on page 5-3. Step 1 Actions and questions Make sure the media installed in the tray meets specifications. Does the media meet specifications? Yes Go to step 2 2 Check tray for the edge guide setting and media loading. Edge guides should be adjusted against edge of media. Media should be fanned and lay flat in the tray. Is the media properly loaded in the tray? 3 Remove the ITU and check for the jam at the second transfer roll. Is paper jammed at the second transfer roll? Go to step 3 Clear the jam. 200.16 paper jam service check S2 or narrow media sensor made early. Note: See "Printer sensors" on page 5-3. Step 1 2 Actions and questions Check tray for the edge guide setting and media loading. Edge guides should be adjusted against edge of media. Media should be fanned and lay flat in the tray. Is the media properly loaded in the tray? Media may not have been cleared from a previous jam. Is media in paper path? Yes Go to step 2 Clear the paper path. No Properly load media. Contact your next level of support. No Inform the customer that media loaded in Tray x does not meet specification. Properly load media. Contact your next level of support. No Properly load media. Contact your next level of support. 2-30 Service Manual