Lexmark C782 Service Manual - Page 204

5061 PRINTER SETUP Defaults This setting is used by the printer to determine whether US or non-US factory defaults should be selected. The following printer settings have different US and non-US values: Printer default values Media size (paper feeding sources which do not have hardware size sensing capabilities) Envelope size (Envelope feeding sources which do not have hardware size sensing capability) Fax media size PCL symbol set PPDS code page Universal units of measure US value Letter 10 Envelope Letter PC-8 437 Inches Non-US value A4 DL Envelope A4 PC-850 850 Millimeters Warning: Modification of the printer setting Defaults causes the NVRAM space to be restored to the printer's factory settings. PAGE COUNTS PAGE COUNTS Prt Color Pg Count Prt Mono Pg Count Perm Page Count Setting the page counts The printer's page count can be changed through the diagnostic menu. The Color and Mono Page Count can be changed whenever the media size sensing board is replaced. Note: The Perm Page Count cannot be changed. 1. Select PAGE COUNTS from PRINTER SETUP in the Diagnostics mode. 2. Select either Color Page Count or Mono Page Count. When you have made the selection, a screen similar to the following is displayed: Color Page Count =1234567* 3. The left most digit blinks, indicating it is the first digit to be changed. To change the value, press or until the desired value is displayed. Press Select to move to the next digit. The digit blinks. Continue modifying each digit using this method. To skip a digit and keep its current value, press Select. 4. When you have completed selecting the final digit, press Select and the count is stored in NVRAM. 5. Press Back ( ) to return to PRINTER SETUP. 6. Select a new test or select Exit Diagnostics from the Diagnostic Menu. 3-26 Service Manual