Pioneer VSX-49TX Owner's Manual - Page 39
Display
View all Pioneer VSX-49TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
PREPARATION PREPARATION Display All the display information is explained and/or referenced here. 1 2 34 5 SIGNAL L C R AUTO RF LS S RS LFE OVER ATT DIGITAL SP 3 AB ANALOG TAPE 2 TUNED STEREO MONO RDS RF ATT Displays & Controls 6 DIGITAL DISC MTRX PRO LOGIC Neo :6 MPEG 2ch PLAYBACK 9 10 87 1 SIGNAL SELECT indicators Light to indicate the input signal you selected. Since there is no indicator light for i.LINK, when it is selected none of the indicators listed below will light. When none are lit this indicates i.LINK is selected nothing lit - An i.LINK signal is selected. ANALOG : Lights when an analog signal is selected. DIGITAL : Lights when a digital signal is selected. 2RF : Lights when an 2 RF signal is selected. AUTO : Lights when the receiver is set to select the input signal automatically. 2 Program Format indicators For Dolby Digital or DTS sources : These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1ch playback flag is being used. L - Left front channel. C - Center channel. R - Right front channel. LS - Left surround channel. S - Surround channel (mono). RS - Right surround channel. LFE - Low frequency effects channel. 3 ((( ))) - Lights when LFE signal is input. 4 Analog level indicators OVER - This lights if the signal is in danger of distorting for analog source signals. Press INPUT ATT on the front panel to lower the signal level. ATT - Lights when INPUT ATT is used to reduce the level of the analog source signal. 5 Character display Shows current mode, status, etc. 6 Digital format indicators DIGITAL : Lights when a Dolby Digital signal is detected. : Lights when a DTS signal is detected. MPEG : Lights when an MPEG signal is detected. : Lights when the HOME THX mode is selected. : Lights during Surround EX matrix processing. : Lights when a decoding DTS-ES audio. DISC : Lights during DTS-ES discrete processing. MTRX : Lights during DTS-ES matrix processing. PRO LOGIC : Lights during Dolby Pro Logic II processing. Neo :6 : Lights during Neo: 6 processing. 2ch PLAYBACK : Lights during two-channel playback. 7 Speaker indicators Light to indicate the current speaker system, A and/or B. 8 TAPE 2 indicator Lights when the TAPE 2 monitor is on. 9 TUNER indicators MONO : Lights when the tuner is set to receive FM broadcasts and when selected MPX mode. STEREO : Lights when a FM stereo broadcast is received in the auto stereo mode. TUNED : Lights when a broadcast is received. 10 i.LINK indicator (see p.49, step 3) Lights when an i.LINK-audio-equipped component is selected. 39