Pioneer VSX-49TX Owner's Manual - Page 48

Setting Up for Surround Sound Check the Auto Settings If you want to check what settings have been input for your surround sound parameters you can do it following the steps below. 1 3 2 RECEIVER DVD/LD Receiver TONE BASS/ ATREBLE VCR1 /DVR VCR2 VCR3 TV DISPLAY DIMMER STATUS SYSTEM SETUP VIDEO SELECT SPEAKER A/B MAIN SUB EFFECT/ CH SEL. LOUDNESS TAPE 2 MONITOR INPUT ATT. SIGNAL SELECT REMOTE SETUP CD CD-R/ TAPE1 TUNER VIDEO SAT TV CONTROL 4 System Setup [Auto Surround Setup] [1. Input Assign ] [2. Surround Setup ] [3. Expert Setup ] [4. THX Audio Setup ] [Exit] 1 Switch on the receiver and your TV. Make sure your TV is set to this receiver as you will use the on-screen displays on your TV to follow these instructions. 2 Press the SUB button on the remote control's receiver screen. 3 Press the SYSTEM SETUP button and use the on-screen display (OSD) that appears on your TV. The SYSTEM SETUP menu appears on the OSD. 4 Use the 5∞ buttons to select SURROUND SETUP and press ENTER. 5 CHECK should be selected, press ENTER. 5 2.Surround Setup [ Check ] [ 1.Speaker Systems ] [ 2.Channel Level ] [ 3.Speaker Distance ] [ 4.Acoustic Cal EQ ] [Return] 6 The first menu in which you can check your settings will appear. This is the speaker settings. Navigate this menu with the 2 3 buttons. 7 When you want to check the next settings select NEXT with the 5∞ buttons and press ENTER. The order of the settings menus is: Speaker Systems; Channel Level; Speaker Distance; Acoustic Calibration EQ. If you want to leave the settings check select RETURN with the 5∞ buttons and press ENTER. 8 Continue to move through the menus using the 5∞ buttons and pressing ENTER until you are done checking the settings. 9 To exit the this mode select RETURN with the 5∞ buttons and press ENTER. You will return to the SURROUND SETUP menu. Then select EXIT and press ENTER to exit the setup process. 48