Ricoh CL7200 Setup Guide - Page 159

Preparing for Printing The installer starts. Auto Run may not work with certain operating system settings. If this happens, launch "Setup.exe" on the CD-ROM root directory. C Select an interface language, and then click [OK]. The default interface language is English. D Click [PCL/RPCS Printer Drivers]. E The software license agreement appears in the [License Agreement] dialog box. After reading the agreement, click [I accept the agreement], and then click [Next]. F Select a printer driver you want to use in the [Printer Program] dialog box. You can select several printer drivers. G Select the printer model you want to use. The printer name can be changed in the [Change settings for 'Printer Name'] box. H Double-click the printer name to display the printer settings. ❒ The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port. I Click [Port:], and then click [Add]. J Click [SmartDeviceMonitor], and then click [New Port...]. K Click [IPP]. L In the [Printer URL] box, enter "http://printer's address/printer" as the printer's address. If the server authentification is issued, to enable SSL( a protocol for encrypted communication), enter "https://printer's address/printer" (Internet Explorer 5.01, or a higher version must be installed). Create the IPP port in SmartDeviceMonitor for Client. (example IP address: 192.168.15.16) http://192.168.15.16/printer https://192.168.15.16/printer You can enter "http://printer's address/ipp" as the printer's address. M Enter a name for identifying the printer in [IPP Port Name]. Use a name dif- ferent from the one of any existing port. If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name. N Click [Detailed Settings] to make necessary settings. 19