Ricoh CL7200 Setup Guide - Page 390

Monitoring and Configuring the Printer Messages Full: Hole Punch Receptacle Full: Standard Tray Full: Waste Toner Full: Waste Toner Bottle Hex Dump Mode Immed. Trans. not connected Immediate Transmission Failed In Use: Copier In Use: Fax In Use: Finisher In Use: Input Tray In Use: Staple Unit Independent-supplier Toner Key Card not inserted Key Card/Counter not inserted Key Counter not inserted Loading Toner... Low: Black Toner Low: Cyan Toner Low: Magenta Toner Low: Toner Low: Yellow Toner Malfunction: Booklet Processor Malfunction: Ext. Charge Unit Malfunction: Finisher Malfunction: Interposer Malfunction: LargeCapacity Tray Malfunction: Output Tray Description Punch Chip receptacle for hole punch is full. The output paper tray is full. Waste toner is full. Waste toner bottle is full. It is a hex dump mode. It did not connect directly with the other party of the transmission. An error has occurred while transmitting directly. The copier is being used. The fax is being used. Other functions is using Finisher. Other functions is using the input tray. Other functions is using the staple unit. Toner that is not recommended is set. The machine is waiting for key card to be inserted. The machine is waiting for key card or key counter to be inserted. The machine is waiting for key counter to be left in it. Toner is being supplied. The black toner cartridge is not set correctly, or toner is almost running out. The cyan toner cartridge is not set correctly, or toner is almost running out. The magenta toner cartridge is not set correctly, or toner is almost running out. The black toner cartridge is not set correctly, or toner is almost running out. The yellow toner cartridge is not set correctly, or toner is almost running out. There is a problem with booklet finisher. There is a problem with external charge unit. There is a problem with Finisher. There is a problem with Interposer. There is a problem with LargeCapacity tray. There is a problem with output tray. 250