Ricoh CL7200 Setup Guide - Page 388

Monitoring and Configuring the Printer Getting Printer Information over the Network This section explains details of each item displayed in the printer status and information. Current Printer Status The printer status can be checked using the following commands: • UNIX: Use the "lpq" command and "rsh", "rcp", and "ftp" parameters. • mshell: Use the "status" command. Messages Access Restricted Add staples (Booklet: Back) Add staples (Booklet: Both) Add staples (Booklet: Front) Adjusting... Call Service Center Canceled Canceling Job... Card/Counter not inserted Coin or amount not inserted Coin/Key Counter not inserted Configuring... Cover Open: ADF Cover Open: Duplex Unit Cover Open: Finisher Cover Open: Front Cover Open: Front/Left Cover Open: Paper Exit / Rear Cover Open: Right Cover Open: Top Data Size Error Description The job was canceled because user have no authority. The staple of booklet finisher (back) is exhausted. The staple of booklet finisher is exhausted. The staple of booklet finisher (front) is exhausted. The machine is initializing or calibrating. There is a malfunction in the machine. The job is reset. The job is being reset. The machine is waiting for prepaid card or key. The machine is waiting for coin to be inserted. The machine is waiting for coin or key counter. Setting is being changed. The document feeder is open. The cover of the duplex unit is open. The cover of Finisher is open. The front cover is open. The front cover or left cover is open. The paper exit cover or rear cover is open. The right cover is open. The top cover is open. The data size error occurred. 248