Ricoh CL7200 Setup Guide - Page 581

Troubleshooting Messages / Second messages Description Hardware Problem HDD The printer identified a HDD Board error. Hardware Problem IEEE1394 The printer identified an IEEE 1394 interface board error. Solution Turn the power off, and then on. Remove and re-install the HDD board correctly. If the message appears again, contact your sales or service representative. See "Attaching Printer Hard Disk Type 7100", Setup Guide. Turn the power off, and then on. Remove and re-install the IEEE 1394 interface board correctly. A Check the IEEE 1394 interface board is correctly attached to the computer. B Check the IEEE 1394 interface cable is securely connected. C Unplug the IEEE 1394 interface cable which is connected to the printer. D Restart the computer. If the message appears even after executing above operation, proceed to the following steps. E Execute the utility tool for IEEE 1394 interface board that is stored in the following path in the CDROM labeled "Printer Drivers and Utilities": UTILITY\1394 Hardware Problem Option RAM ❒ For details about using the utility tool for IEEE 1394, see the README file in the same directory in the CD-ROM. If the message appears again, contact your sales or service representative. See "Attaching IEEE 1394 Interface Board Type B", Setup Guide. The printer identified an option- Turn the power off, and then on. Re- al RAM error. move and re-install the optional RAM. If the message appears again, contact your sales or service representative. See "Attaching Memory Unit Type C (SDRAM Module)", Setup Guide. 100