Ricoh CL7200 Setup Guide - Page 405

Monitoring and Configuring the Printer Message exiting Exit pserver Frametype = httpd start. inetd start. IPP cancel-job: permission denied. ipp disable. ipp enable. IPP job canceled. jobid=%d. LeaseTime=(sec), RenewTime=(sec). Login to fileserver (,) Memory allocate error. Name registration success. WINS Server= NetBIOS Name= Name registration success in Broadcast name= Name registration failed. name= nbtd start. npriter start. (NetWare) nwstart start. (NetWare) Open log file papd start. (AppleTalk) Problem and solutions The lpd service has ended and the system is exiting the process. (In the print server mode) The print server function is disabled because the necessary print server settings have not been made. The frame type name is configured to be used on NetWare. The httpd service has started. The inetd service has started. The printer could not authenticate the name of the user attempting to cancel a job. Printing with ipp is disabled. Printing with ipp is enabled. The spooled job was canceled due to error or user request. The resource lease time received from the DHCP server is displayed in [lease time] in seconds. The renewal time is displayed in [renew time] in seconds. (In the print server mode) Login to the file server is in the NDS or BINDERY mode. Data cannot be obtained. Disconnect the USB cable, and then connect it. Name registration of was successful. Name registration by Broadcast name of was successful. Name registration of failed. Set unique NetBIOS name. The nbtd service has started. (In the remote printer mode) The NetWare service has started. The service for NetWare protocol stack setting has started. (In the print server mode) The specified log file has been opened. The AppleTalk print service has started. 265