Ricoh CL7200 Setup Guide - Page 416
Click, in the left area, and then click, Confirm the settings, From Windows, start NWadmin.
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
Using a Printer Server ❒ For details about the passwords, consult your network administrator. F Click [Configuration] in the left area, click [Network], and then click [NetWare]. The following items are displayed: • Print Server Name: Enter the NetWare print server name. To use the inter- face board as a print server, enter the name of a print server that is not active on the file server. Use up to 47 single byte characters. • Logon Mode: Specify whether to designate a file server or NDS tree when logging on to NetWare. • File Server Name: When a file server name is entered here, only the specified file server is searched for. This item is mandatory. Use up to 47 single byte characters. • NDS Tree: To enable NDS mode, enter the name of the NDS tree you want to log on to. Use up to 32 single byte alphanumeric characters. • NDS Context Name: To enable NDS mode, enter the print server context. Use up to 127 single byte characters. • Operation mode: Specify whether to use the interface board as a print server or a remote printer. • Remote printer number: This item is effective if you have selected to use the interface board as a remote printer. Enter the same number as the number of the printer to be created on the print server. Use 0 to 254 single byte characters. • Job Timeout: When the interface board is running as a NetWare remote printer, the printer cannot judge when a print job ends. Therefore, the printer terminates printing when a certain period of time has elapsed since it received print data (i.e., when it has not received print data for a certain period of time). Specify this period of time (3 to 255 seconds) single byte characters. The default value is 15 (seconds). • Frame Type: Select the frame type from the drop-down menu. • Print Server Protocol: Select the protocol for NetWare from the drop-down menu. • NCP Distribution Protocol: Select the protocol for NCP distribution. G Confirm the settings, and then click [Apply]. Configuration is now complete. Wait for several minutes if you want to restart Web Image Monitor. Setting up using NWadmin A From Windows, start NWadmin. For details about NWadmin, see the NetWare manuals. 276