Ricoh CL7200 Setup Guide - Page 404
Connected DHCP Server<DHCP server ad, Established SPX Connection with PServ
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 404 highlights
Monitoring and Configuring the Printer Message Problem and solutions btd is disabled. Communication via Bluetooth is unavailable because btd is disabled in the security mode. Enable the btd in the security mode. centrod is disabled. Communication via parallel connection is unavailable because centrod is disabled in the security mode. Enable centrod in the security mode. child process exec error! (process name) The network service failed to start. Turn the printer off and then on. If this does not work, contact your service or sales representative. Connected DHCP Server(). from the DHCP server. connection from Login was from the host IP address. Could not attach to FileServer (In the remote printer mode) Connection to the file server has not been established. The file server has refused the connection. Check the file server configuration. Could not attach to PServer (In the remote printer mode) Connection to the print server has not been established. The print server has refused the connection. Check the print server configuration. Current Interface Speed:xxxMbps Speed of the network (10 Mbps or 100 Mbps) Current IP address The IP address was received from the dhcp server. Current IPX address Current ipx address DHCP lease time expired. DHCP lease time has expired. The printer tries to discover the DHCP server again. The IP address until now becomes invalid. DHCP server not found. The DHCP server was not found. Make sure that the DHCP is on the network. dhcpcd start. The DHCPCD service (dhcp client service) has started. dpsd is disabled. PictBridge cannot be used when connected to the digital camera because Pictbridge is disabled in the security mode. Enable PictBridge in the security mode. Duplicate IP=(from ). The same IP address is used. Each IP address must be unique. Check the address of the device indicated in [MAC address]. Established SPX Connection with PServer,(RPSocket=, connID=) (In the remote printer mode) Connection to the print server has been established. 264