Ricoh CL7200 Setup Guide - Page 379

Monitoring and Configuring the Printer msh> snmp v3trap {1- 5} • If a number from 1-5 is entered, settings are displayed for that number only. ❖ Configuring a sending address for SNMP v3 TRAP msh> snmp v3trap {1-5} {ip| ipx} address ❖ Configuring a sending protocol for SNMP v3 TRAP msh> snmp v3trap {1-5} active {ip/addr | ipx} {on | off} ❖ Configuring a user account for SNMP v3 TRAP msh> snmp v3trap {1-5} account account_name • Enter an account name using up to 32 alphanumeric characters. ❖ Deleting an SNMP v3 TRAP user account msh> snmp v3trap {1-5} clear account ❖ Configuring an SNMP v3 encryption algorithm msh> snmp v3auth {md5 | sha1} ❖ Configuring SNMP v3 encryption msh> snmp v3priv {auto | on} • If you select "auto", the print job will be encrypted when encryption is pos- sible. • If you select "on", Clear Text communication is not possible, and encryption password must be set before encryption communication can be used. ❒ Encryption is possible when the security option is installed correctly and the password is specified. sntp The printer clock can be synchronized with a NTP server clock using Simple Network Time Protocol (SNTP). Use the "sntp" command to change SNTP settings. ❖ View settings msh> sntp ❖ NTP server address configuration You can specify the IP address of the NTP server. msh> sntp server "IP_address" ❖ Interval configuration msh> sntp interval "polling_time" 239