Ricoh CL7200 Setup Guide - Page 363
Dynamic DNS function setting, Specifying the record overlap operation, CNAME registration
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
Monitoring and Configuring the Printer msh> dns 1 server 192.168.15.16 • You can register up to three DNS server numbers. • Applicable address numbers are 1 to 3. You can register up to three ad- dresses. • You cannot use "255.255.255.255" as the DNS server address. ❖ Dynamic DNS function setting msh> dns "interface_name" ddns {on|off} • You can set the dynamic DNS function "active" or "inactive". • {on} means "active" and {off} means "inactive". • ip1394 can be specified only when the IEEE 1394 interface is installed. • wlan can be specified only when the IEEE 802.11b interface is installed. Interface name ether ip1394 wlan Interface configured Ethernet interface IEEE 1394 interface IEEE 802.11b interface ❖ Specifying the record overlap operation msh> dns overlap {update|add} • You can specify operations performed when records overlap. • update To delete old records and register new records. • add To add new records and store the old records. • When CNAME overlaps, it is always changed, irrespective of settings. ❖ CNAME registration msh> dns cname {on|off} • You can specify whether to register CNAME. • {on} means "active" and {off} means "inactive". • The CNAME registered is the default name beginning with rnp. CNAME cannot be changed. ❖ A records registration msh> dns arecord {dhcp|own} • {dhcp} You can specify the method of registering an A record when the dynamic DNS function is enabled and DHCP is used. • {own} To register an A record using the printer as the DNS client. 223