Ricoh CL7200 Setup Guide - Page 371

Monitoring and Configuring the Printer ❖ Rendezvous computer name setting You can specify the rendezvous computer name. msh> rendezvous cname "computer name" • The computer name can be entered using up to 63 alphanumeric characters. ❖ rendezvous Installation location information setting You can enter information about the location where the printer is installed. msh> rendezvous location "location" • Information about location can be entered using up to 32 alphanumeric characters. ❖ Setting order of priority for each protocol • diprint msh> rendezvous diprint [0-99] • lpr msh> rendezvous lpr [0-99] • ipp msh> rendezvous ipp [0-99] You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher priority. ❖ IP TTL setting msh> rendezvous ipttl {1-255} You can specify the IP TTL (the number of routers a packet can pass through). ❒ The default is 255. ❖ Resetting the computer name and location information You can reset the computer name and location information. msh> rendezvous clear {cname | location} • cname Reset the computer name. The default computer name will be displayed when the computer is restarted. • location Reset the location information. The previous location information will be deleted. ❖ Interface configuration msh> rendezvous linklocal "interface_name" • If many types of interface are installed, configure the interface that communicates with linklocal address. 231