Ricoh CL7200 Setup Guide - Page 460
When static IP addresses are set for each interface
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 460 highlights
Appendix ❖ When static IP addresses are set for each interface • IP address: When set at the same value, the Ethernet interface is preferred. • Subnet mask: When a value overlaps, the Ethernet interface is preferred. • Gateway address: The value set is used. For the gateway address, set the gateway address located in the subnetwork set by the interface. If the value is outside the subnet range set by the interface, it operates as "0.0.0.0". ❖ When each setting is acquired from the DHCP server • IP address, subnet mask: Set for each value leased by the DHCP server operating on a connected interface. When overlapping IP addresses or identical IP addresses in the subnetwork are set, only the highest priority active value is set for the interface. ❒ The default priority interface is Ethernet. • AutoNet: An automatic private address (169.254. xxx.xxx) is set for high priority interfaces. ❒ The default priority interface is IEEE 1394 (IP over 1394). • Gateway address, DNS server address, domain name: Settings are made for DHCP-acquired values that have the highest interface priority. If the gateway address is outside the subnetwork range set by the interface, it operates as "0.0.0.0". ❒ The default priority interface is Ethernet. ❖ When the settings of the static IP addresses and the DHCP acquired value overlap • IP address, subnet mask: When the static IP address and DHCP-acquired value (IP address) are the same, or the static subnet mask value and DHCP-acquired subnet mask value overlap, the interface set by the static IP address is available using its value set. The interface set by DHCP is reset to the default. • Gateway address: Use the manually set value. • If a gateway address is set outside the interface subnetwork range, it operates as "0.0.0.0". ❒ When the static IP address is not set, or is set as "0.0.0.0", the interface setting the DHCP-acquired value is activated. ❒ Supported DHCP server operating systems are: Windows 2000 Server, Windows NT 4.0 Server Service Pack 4 or higher, NetWare, and UNIX standard. 320