Ricoh CL7200 Setup Guide - Page 324

Making Printer Settings Using the Control Panel ❖ Trans. Speed You can select the transmission speed for IEEE 802.11b. • Auto • 11 Mbps • 5.5 Mbps • 2 Mbps • 1 Mbps ❒ Default: Auto ❖ SSID You can set an SSID in the infrastructure mode and the 802.11 Ad hoc mode. Select [View] to check the SSID. Select [Enter ID] to set SSID. • View • Enter ID ❒ Select [?] to enter [/] for the SSID. Also, [¥] appears when printing the configuration page, read it as [/]. ❒ Default: blank (ASSID) ❒ Characters used are ASCII 0x20-0x7e (32 bytes). ❒ An SSID is set automatically to the nearest access point if no SSID has been set. ❒ If no SSID has been set for the 802.11 ad hoc mode, an SSID is set au- tomatically and the same SSID is used for the 802.11 ad hoc mode and the infrastructure mode. ❒ If blank is specified in SSID for 802.11b adhoc mode or adhoc mode, "ASSID" appears. ❒ An SSID can also be set using Web Image Monitor. For details, see Web Image Monitor Help. ❖ WEP Setting You can specify whether or not to activate WEP settings. • Active • Not Active ❒ Default: Not Active ❒ The WEP key can be entered using a hexadecimal number or an ASCII character sequence. 184