Ricoh CL7200 Setup Guide - Page 192
Form Feed, Banner Printing after Resetting the Printer, Advanced, Send CTRL+D before job
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Preparing for Printing C Click [Advanced]. D Clear the [Send CTRL+D before job] and [Send CTRL+D after job] check boxes, and then click [OK]. E Click [OK] to close the printer properties dialog box. Form Feed Do not use NetWare to configure form feed. Form feed is controlled by the printer driver on Windows. If NetWare form feed is configured, the printer may not print properly. Follow the procedure below to disable form feed according to the operating system used: • Under Windows 95/98/Me, clear the [Form feed] check box on the [Printer Set- tings] tab in the printer properties dialog box. • Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear the [Form feed] check box on the [NetWare Settings] tab in the printer properties dialog box. Banner Page Do not use NetWare to configure a banner page. Follow the procedure below to disable banner pages according to the operating system used: • Under Windows 95/98/Me, clear the [Enable banner] check box on the [Printer Settings] tab in the printer properties dialog box. • Under Windows 2000/XP, Windows Server 2003, or Windows NT 4.0, clear the [Enable banner] check box on the [NetWare Settings] tab in the printer properties dialog box. Printing after Resetting the Printer Printer to print server connection requires 30 - 40 seconds to resume after the printer is reset. During this period, jobs may be accepted (depending on NetWare specifications) but not printed. To print after resetting the printer as the remote printer, check on the print server that the remote printer is disconnected, or wait for two minutes before trying to print. 52