Ricoh CL7200 Setup Guide - Page 48

Installing Options Available Options This section describes how to install options. By installing options, you can improve the printer performance and have an expanded variety of features to use. For the specifications of each option, see Maintenance Guide. • Before installing options, the machine should be turned off and unplugged for at least an hour. Components inside the machine become very hot, and can cause a burn if touched. • Before moving the machine, unplug the power cable from the outlet. If the cable is unplugged abruptly, it could become damaged. Damaged plugs or cables can cause an electrical or fire hazard. • When lifting the machine, use the grips on both sides. The machine could break or cause an injury if dropped. ❒ The voltage rating of the connector for options is 24 V DC or less. Option List The following is a list of options for this printer. Some printer models come with the expansion Hard Disk Drive and the duplex unit attached as default. Paper Feed Unit Type 7300 (500 × 1) Basic model printer Duplex unit standard model printer Paper Feed Unit Type 7300 (500 × 2) Paper Bank Type 7300 SR960 (2 Tray Finisher) SR950 (Booklet Finisher) Duplex Unit Type 7100 Printer Hard Disk Type 7100 Memory Unit Type C (SDRAM module) Gigabit Ethernet Type 7300 IEEE 802.11b Interface Unit Type H IEEE 1394 Interface Board Type B Bluetooth Interface Unit Type 3245 G1307525_1.00 Copyright © 2005 48