Ricoh CL7200 Setup Guide - Page 389

Monitoring and Configuring the Printer Messages Empty: Black Toner Empty: Cyan Toner Empty: Magenta Toner Empty: Yellow Toner Energy Saver Mode Error Error at Printer: Red LED Error in Printer Error: Address Book Error: Command Transmission Error: DIMM Value Error: Ethernet Board Error: HDD Board Error: IEEE1394 Board Error: Memory Switch Error: Optional Font Error: Optional RAM Error: Parallel I/F Board Error: PDL Error: USB Interface Error: Wireless Card Error: Wireless Card or Board Exceed Booklet Stapling Limit Full: Copy Tray Full: Finisher Full: Finisher Shift Tray Full: Finisher Shift Tray 1, 2 Full: Finisher Upper Tray Description The black toner cartridge is almost empty. The cyan toner cartridge is almost empty. The magenta toner cartridge is almost empty. The yellow toner cartridge is almost empty. The machine is in Energy Saver Mode. An error has occurred. An error has occurred. An error has occurred. An error has occurred in the data of the address book. An error has occurred in the machine. A memory error occurred. An Ethernet board error has occurred. A hard disk drive board error has occurred. An IEEE 1394 interface board error has occurred. A memory switch error has occurred. An error has occurred in the font file of the machine. An error has occurred in the optional memory unit. An error has occurred in the parallel interface. An error has occurred in the page description language. An error has occurred in the USB interface. Wireless card is not inserted during start up, or the IEEE 802.11b interface unit or the wireless card is taken out after start up. An error has occurred in the IEEE 802.11b interface unit. The printing has exceeded the stapling limit of the booklet finisher. The output paper tray is full. Finisher tray is full. Shift tray of Finisher is full. The shift tray 1 and 2 of Finisher are full. The upper tray of Finisher is full. 249