Ricoh CL7200 Setup Guide - Page 421
Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
Using a Printer Server ❖ To start CAREE: load pserver print_server_name ❒ If the printer works as configured, the message "Waiting for job" appears. Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5) Follow the procedure below to use the printer as a remote printer under NetWare 4.x, 5/5.1 and 6. ❒ To use the printer as a remote printer under NetWare 4.x/5/5.1, set it to NDS mode. ❒ Do not use the printer as a remote printer when Pure IP is used. Setting up using NIB Setup Tool A Log on to the file server as an administrator or administrator equivalent. B StartNIB Setup Tool from [Start] menu. C Click [Property Sheet], and then click [OK]. D Select the printer you want to configure, and then click [Finish]. A dialog box prompting you to perform the remaining configuration tasks in the Web browser appears. Click [OK], and then wait until Web Image Monitor starts automatically. E A dialog box for entering the user name and password appears. Enter the user name and password, and then click OK. ❒ For details about passwords, consult your network administrator. F Click [Configuration] in the left area, click [Network], and then click [NetWare]. The following items are displayed: • Print Server Name: Enter the NetWare print server name. To use the inter- face board as a print server, enter the name of a print server that is not active on the file server. Use up to 47 single byte characters. • Logon Mode: Specify whether to designate a file server or NDS tree when logging on to NetWare. • File Server Name: When a file server name is entered here, only the specified file server is searched for. This item is mandatory. Use up to 47 single byte characters. 281