Ricoh CL7200 Setup Guide - Page 362

Monitoring and Configuring the Printer port 9100 timeout=300(sec) bidirect on conn multi apl async • The "port" specifies the port number of the direct printing port. • The "bidirect" setting indicates whether the direct printing port is bidirec- tional or not. ❖ Setting timeout msh> diprint timeout [30~65535] • You can specify the timeout interval to use when the printer is expecting data from the network. • The default is 300 seconds. ❖ Setting bidirect msh> diprint bidirect {on | off} • You can specify whether the direct printing port is bidirectional or not. ❖ Specifying the number of concurrent connections msh> diprint conn [multi | single] The above command specifies the number of concurrent diprint connections. Specify "multi" for multiple connections or "single" for a single connection. ❖ Specifying synchronization msh> diprint apl [async | sync] The above command specifies whether to synchronize disconnection and application termination. Specify "sync" if you want to perform synchronization, or "async" otherwise. dns Use the "dns" command to configure or display DNS (Domain Name System) settings. ❖ View settings The following command displays current DNS settings: msh> dns ❖ DNS server configuration The following command enables or disables the DNS server address: msh> dns "number" server "server address" The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server: 222